Antique Longcase Clocks

The name Osborne is stamped on the false plate behind the dial. He was John Pace, a man who could make watches and the most exquisite clocks. He seems to have delighted in making small skeleton clocks, designed so that the mechanism was an ornament and showpiece of itself. John Pace had his shop in Abbeygate Street from until In later years the shop was recorded in the Directories at number 19 in that street, and may well have been there from the beginning. Pace was a leading figure in the Society of Friends, and was Secretary of the local Quaker Meetings from to John Pace worked in Bury St Edmunds making all types of clocks and watches, and had a good reputation for his skeleton clocks.

Antique Longcase & Grandfather Clocks (Pre)

But it was not used in the same manner throughout that period of over two centuries. The earliest clocks were costly items, made for wealthy clients, principally served by London clockmakers, and rich timbers were used such as walnut and olive-wood. Cheaper versions were made from about by provincial clockmakers and for these oak was used, being a far less costly timber, though occasionally pine was used at a lesser cost still.

These earliest oak cases were simple by intent, partly because London styles which they copied in simplified form were themselves still simple, but partly because there was little point in offering a clock in cheaper materials if the sheer extravagance of styling made it into a costly clock anyway.

If your grandfather clock has a brass dial, it was probably made in the period between and The early brass dial clocks only had one hand, because the average person had no need of knowing the time to the nearest minute, and with a bit of practise you can tell the time to the nearest five minutes on one of these early (and rare) clocks.

Apr 16, Thyme said: However, I will add this since it is relevant. Having restored this dial, I initially asked JB privately, just before beginning work on his dial for a photo of the calendar hand. Because the calendar function had apparently stopped a very long time ago and the hand had left a indelible, permanent outline of itself in the original, aged paint on the dial.

The residual mark appeared to have been as old as the dial itself. Judging from the look of the hands for the calendar and seconds dials, and the way they do fit their time tracks exactly, I have no reason to suspect that they are anything short of being original to the clock. I think it’s a logical expectation that if these brass calendar and seconds hands are original, then the hour and minute hands would be of the same material and of similar design.

If the minute and hour hands are not original, I think we would be hard pressed to find others that would be a better match. I wouldn’t claim to an expert on anything. I agree there is no reason to believe the calendar and seconds hands are not original. The fact the minute hand is a little oversized wouldn’t bother me and I can’t say I think the hour hand is really over large. They all look really nice on a beautifuly resored dial.

Excessive Traffic

Don’t worry — your e-mail address is totally secure. I promise to use it only to send you Clock Collecting Tips. There are so many styles and types of clocks, made by so many clock makers and from so many countries, that I was totally lost.

Antique Grandfather Longcase Clocks, Longcase Clock. Oak cased 30 hour clock by Richard Stedman from Godalming, Surrey. Listings by region. Matching blued steel hands. Previous owner history dating back to the `s with the antique clock.

Origin[ edit ] Lateral view of a longcase clock movement without striking mechanism, mid s. The advent of the longcase clock is due to the invention of the anchor escapement mechanism by Robert Hooke around These consumed less power allowing clocks to run longer between windings, caused less friction and wear in the movement, and were more accurate. The long narrow case actually predated the anchor clock by a few decades, appearing in clocks in to allow a long drop for the powering weights.

However, once the seconds pendulum began to be used, this long weight case proved perfect to house it as well. Description[ edit ] Most of a longcase clock’s height is used to hold the long pendulum and weights.

Dating a Grandfather Clock

Mandapa — Mandapa in Indian architecture is a pillared outdoor hall or pavilion for public rituals. In the Hindu temple the mandapa is a structure through the. It is used for dancing and music and is part of the basic temple compound. The prayer hall was built in front of the temples sanctum sanctorum. A large temple would have many mandapas, if a temple has more than one mandapa, each one is allocated for a different function and given a name to reflect its use.

Aug 24,  · Dating Longcase Hands??? Discussion in ‘Clock Repair’ started by leeinv66, Aug 23, I have several Black Forest shield clocks and a postman’s clock, but the hands on all of those are shorter and made of brass like the ones you have. These one are far too long to fit the chapter ring on one of those clocks. leeinv66 Super Moderator.

Designed by renowned architect Sir Edwin Lutyens and built in for Queen Mary, wife of George V, the dolls house reveals a small slice of the royals’ high life. Its tiny contents, on a scale of one inch to one foot, range from the Lux flakes by the kitchen sink to electricty, running water and even a lift. The 5ft tall dolls house designed for Queen Mary which has works of art Through the key hole: Inside the Queen Mary’s doll house The landscaped grounds, designed by Gertrude Jekyll, a top gardener of the time, has a functioning lawnmower.

In the garage stand six ‘horseless carriages’ including a Daimler limousine and the Rolls, while the building houses works of art, spanning from Victorian and pre-Raphaelite. By the sink are tiny tins of Lifebuoy and Sunlight soap. The house — now on show at Windsor Castle – has such attention to detail that it has proved to be a valuable document of social history, according to author Lucinda Lambton in her new book,The Queen’s Dolls’ House.

Enlarge Dinner is served:

Georgian Antique Longcase & Grandfather Clocks

The 18th and 19th Centuries were the best of times for the English clock industry. A few clocks were made in other parts of the British Isles. A few early American clocks were produced by immigrant clockmakers, resembling clocks from the countries where these clockmakers came from, and some American clocks look just like their English cousins. This English clock was made around It is unusually well made and heavy for a clock from that era. Two features that make this clock very rare are the Graham escapement and the long second hand in the centre which is missing.

Grandmother Clock with mellow strike. 72″ x 9″ x ” Shown unrestored is a fine and quite unusual small Grandmother clock with a silvered engraved dial, fine blued hands and a good size trunk door with bevelled glazed aperture to view the weights and pendulum, The wood is Mahogany with simple line inlays and the case has ‘bombe’ base which aids in the stability.

Types of antique clocks Types of antique clocks Get to know and recognize the different types of highly collectible antique and vintage clocks, old clock identification with antique clock images Antique clocks are one of the most widespread collectible items that even collectors of this age and era still sought after. The art of clock making in the earlier centuries proved to be a very recognized skill. As such, the clocks of those days were highly elaborate and intricate and much more precise compared to what we have today.

Old clocks came in steady pace that created a wide variety of antique clock styles, types, and designs. Antique Lantern clocks This is the oldest form of collectible clock you can find. Lantern clocks originated in but only became popular in the 16th century resembling candle lamps. Earliest forms of antique lantern clocks were weight driven and run for about 12 hours before it needs to be rewound which is about 2 or 3 times a day.

Antique lantern clocks were not perfectly accurate; they commonly lose or gain about 10 to 15 minutes daily. A common feature of lantern clocks is its alarm function which is done and set by turning a small dial inside the main dial. They are inexpensive which makes them affordable to the majority of the population thus contributed much to their demand. The first mantle clocks were made in France, dating back around to developed from French Regency Bracket clocks.

With this basis, old mantel clocks therefore look similar to bracket clocks but are generally smaller. English mantel clocks soon followed about 10 years later.

Antique Longcase Oak Clocks For Sale

Renaissance Turret Clock, German, circa Spring driven Matthew Norman carriage clock with winding key Clockmakers developed their art in various ways. Building smaller clocks was a technical challenge, as was improving accuracy and reliability. Clocks could be impressive showpieces to demonstrate skilled craftsmanship, or less expensive, mass-produced items for domestic use.

The escapement in particular was an important factor affecting the clock’s accuracy, so many different mechanisms were tried. Spring-driven clocks appeared during the 15th century, [25] [26] [27] although they are often erroneously credited to Nuremberg watchmaker Peter Henlein or Henle, or Hele around This resulted in the invention of the stackfreed and the fusee in the 15th century, and many other innovations, down to the invention of the modern going barrel in

A smaller turret clock, dating from about a century later and now in the museum in Zaandam, demonstrates very clearly the vertical verge escapement and foliot or balance bar with adjustable weights on top, typical for the mediaeval concept of variable hours, derived from the sundials of the ancients. Longcase clock by Gerrit Knip, detail of.

History of the Clock Measuring time passing has long since been a practice in human civilization, the ancient Egyptians measured time by means of a water clock. The flow of water between two containers and the sundial measured time during the day. As technology advanced so did time keeping devices. In the early days mechanical clocks did not display minutes or seconds. Galileo, the famous astronomer was the first to discover the possibility of the pendulum within a clock, although this discovery was not realised before his death.

It was Christian Huygens who then incorporated the pendulum and with this came precise time keeping. Clocks from here on advanced in their technology rapidly, and minutes and seconds were now recorded. In Eli Terry patented a new works for a clock, as the mechanism was smaller it allowed for the development of mantel clocks. In coiled springs were beginning to be used in clock making, allowing for even smaller mechanisms again.

Types of Antique Clocks Prior to the 17thC local church tower clocks allowed most people to tell the time, but from the 17thC onwards clocks became more prevalent within the home. When looking for an antique clock there are many types to choose from including the cuckoo clock, atmos clock, torsion clock, carriage clock, grandfather clock, mantel clock and wall clock.

Antique Wall Clock An antique wall clock can be the perfect decorative feature for a wall; a particularly nice piece that is both quirky and full of charm is the Victorian cuckoo clock, originating from Germany there are a variety of playful styles of antique cuckoo clocks to choose from. Wall clocks were a 17thC invention, particularly popular in the Victorian era; the face is typically round with the numbers displayed in roman numerical.

A particularly valuable wall clock is an antique lantern clock, as the oldest antique wall clock available it is extremely valuable especially if the original movement is intact, it is a weight driven clock and more often than not made from brass.

How to Date Your Grandfather Clock

Early days little known. Joseph and Thomas Windmills, Clock and Watchmakers: In about went into partnership with his son Thomas who appears to have been apprenticed to his father in , becoming Free in and Master of Clockmakers Company , dying in Jagger, C. After the partnership started, appears that Windmills is mostly the partnership signature although a few might have existed signed Windmills but only actually by his son, Thomas Neale, J.

More Tilting at Windmills.

Shop metal clocks and other metal decorative objects from the world’s best dealers at 1stdibs. quite a weighty piece. Chromed bezel and clock hands with the makers name centre d s Art Deco Alarm Clock by Jaz. By JAZ. s Art Deco Alarm Clock by Jaz (30″ in height) antique French clock set dating from around Beautifully.

But it wasn’t until about when clockmakers mastered the workings of the pendulum for accurate timekeeping in conjunction with an anchor escapement — the mechanical device that gives a pendulum its swing. If you own a longcase clock, determining its age can tell you how much it is worth. After , most clocks were mass-produced by German and American manufacturers, effectively putting an end to the valuable custom-made grandfather clocks.

The Brass Facts English clockmakers crafted clocks with brass dials from about to Early brass-dial grandfather clocks had only one clock hand, since to clock owners, the hour of the day was more important than minutes. By , grandfather clocks with two hands began showing up in England, even though outlying villages and country regions still had clockmakers crafting clocks with only the hour hand.

From through , brass dials became more ornate and contained other features such as second hands, date hands and wheels. Grandfather clocks with moon dials appeared in clocks made from through Hands to Face While individual features alone are not enough to determine the age of a grandfather clock, combining different elements such as its face, hands, spandrels — the ornamentation near the clock face — and movement pillars can lock in its age.

Antique Clocks: Tips to Help in Dating Antique Clocks

T Summary exciting find because not only is it complete and very original throughout, but it was possibly made at the very end of Richard Savage’s career as he died in This example is another variant to the many types of hour clocks that we already knew Richard made during his forty plus years as a professional clockmaker which includes Lantern, hooded, longcase, and square dial hook-and-spike clocks.

We can now add round dial hook-and-spike clocks to the list.

A grandfather clock (also a longcase clock, tall-case clock, grandfather’s clock, or floor clock) is a tall, freestanding, weight-driven pendulum clock with the pendulum held inside the tower or waist of the case. Clocks of this style are commonly – metres (6–8 feet) tall.

Grandfather clock makers Learn about the previous, current and the top grandfather clock makers Do you have a grandfather clock and you want to learn about its manufacturer? Or you want to know other famous and quality grandfather clock makers? Know them here as we provide the names and brief description of distinguished grandfather clock makers. Popular antique grandfather clock makers The rarity and the charm of antique timepieces such as the grandfather clock is something that attracts people to acquire them.

It is also undeniable that these vintage treasures gain value easily nowadays because of their luxurious and classic facades, not to mention their precise timekeeping abilities. Here are some of the noted and famous antique grandfather clock makers that brought us equally famed timepieces:

Buy Antique Longcase & Grandfather Clocks

The case is the usual high quality construction of Bourdin and we have several photos of the case in pieces if you are interested. This clock strikes the hours on a bell and one blow of the bell for the half hour. If you are looking for a good carriage clock by a very well respected maker, this Bourdin dating to around is superb!

The back plate is stamped C. Vincenti was a superb maker and produced clocks for several of the large and prestigious London retailers of the late Victorian period.

Dating your painted dial longcase clock indicates that the movement will help you will find the us. How to help to dating your antique clocks, terry, whiting. Origin: .

To us, every clock is an individual, no two alike, but the question demonstrates that much of the world doesn’t see clocks and other antiques with the same eyes dealers do. Subtle differences of form, construction, and decoration are often quite transparent to someone who might be willing to spend a significant amount of money to fill a space in their home with an antique longcase clock, and those subtleties have a direct bearing on what the price is for that clock.

The proper reply, as indeed for all antiques, is that the price is determined by the three factors of age, quality, and condition. Age The first longcase clocks in England, where the form was born, were produced about Spring-wound table clocks and weight-driven wall clocks had been made for a couple of centuries prior to this, but they were not particularly reliable timekeepers and it was the invention of the long pendulum in requiring a long case that created a breakthrough in accuracy, and coincidentally introduced a new and unique form of furniture.

The earliest of these new clocks were London-made for royalty or nobility, and, as one would expect, the workmanship was superb.

Antique English 5 Tube Musical Longcase Clock c.1900